High-quality cut-vinyl that will make your vehicle stand out!
Made from premium outdoor vinyl, designed for exterior use. Resistant to heat, cold and car washes.
Before ordering:
*Measure the area where you want the sticker, and compare it to the available sizes shown above. If none fit, contact us and we’ll review your desire.
*The placement shown in the photos is only an example. Stickers can be applied to many smooth, clean surfaces as long as the chosen size fits the intended area.
*Product images showing the sticker on a car are visual previews only.
*Durability depends on correct installation, surface condition, and aftercare.
*Make sure the sticker placement does not interfere with visibility, sensors, or local regulations.
Minimum recommended application temperature: above +8°C (Surface temperature)
-
Clean the glass thoroughly, then degrease with isopropyl alcohol and dry with a lint-free cloth.
-
Position the sticker, use masking tape to hold alignment if needed.
-
Remove the backing paper and apply the sticker slowly while using even pressure with a squeegee.
-
Peel the transfer tape slowly at a low angle.
-
Allow 24-48 hours before washing, for the adhesive to fully bond.
Care & Removal
-
Avoid aggressive chemicals and high-pressure water directly on edges, especially during the first 48 hours.
-
For removal: gently warm the vinyl (hair dryer/heat gun on low), peel slowly, and remove any residue with a safe adhesive remover.
