High-quality cut-vinyl that will make your vehicle stand out!
Made from premium outdoor material, designed for exterior use. Resistant to heat, cold and car washes.
Mockup images are for preview only — **please measure before ordering**.
If none of the size options fit, message us your desired **width/height** and we’ll review it.
**Includes:**
1. Sticker
2. Transfer tape
3. Install guide
Before ordering!
*Custom text produced exactly as entered by the customer, so please double-check spelling before placing your order.
*Measure the area on your windshield where you want the sticker, and compare it to the available sizes shown above. If none fit, contact us and we’ll make the size you need.
*Product images showing the sticker on a car are visual previews only. Actual scale and placement depend on your car and your chosen size/position.
Minimum recommended application temperature: above +8°C (Surface temperature)
-
Clean the glass thoroughly, then degrease with isopropyl alcohol and dry with a lint-free cloth.
-
Position the sticker, use masking tape to hold alignment if needed.
-
Remove the backing paper and apply the sticker slowly while using even pressure with a squeegee.
-
Peel the transfer tape slowly at a low angle.
-
Allow 24-48 hours before washing, for the adhesive to fully bond.
Care & Removal
*Avoid aggressive chemicals and high-pressure water directly on edges, especially during the first 48 hours.
*For Removal: gently warm the vinyl (hair dryer/heat gun on low), peel slowly, and remove any residue with a safe adhesive remover.
